Please note: An end mill bit is no longer included in this kit as it was deemed unnecessary by the manufacturer, Polymer80.
We’ve given you the full, compact, and subcompact sizes of Polymer80 frame-and-jig kits. Well now, we’re bringing a bit more variety to the table. We now have OD green frame-and-jig kits for your Glock® compatible pistol building needs. This one comes in the compact size, so you can turn your EDC into something a bit more unique and than your standard black-framed version.
The Polymer80 PF940C™ 80% Compact Pistol Frame and Jig Kit includes an OD green 80% pistol frame and the required jig to machine it for final assembly. The PF940C features a factory-style grip texture and is guaranteed to be compatible with common components! The provided jig also includes the required drill bits and end mill bit. All you need to complete the kit is a Dremel or handheld router, and a hand drill! It features an extended beavertail and thumb ledge for better control. A double-undercut trigger guard enhances comfort, allowing for a firmer grip. Lastly, engineers upgraded the 22-degree grip angle to 18 degrees. This new angle provides better recoil control and quicker follow-up! Even with a new grip angle, the PF940C is still compatible with OEM and aftermarket Glock® magazines.
PF940C Features and Specs
- Compatible with Glock® 19, 23 & 32 (3-Pin) Gen3 Components
- Comes with jig, drill bits, and end mill bit
- Improved ergonomics and features
- Reinforced hardened polymer
- Factory-style grip texture
- Picatinny/STANAG-Compliant Accessory Rail
- Blank Serialization Plate
- Stainless Steel Locking Block Rail System
- Stainless Steel Rear Rail Module
PF940CV™-ODG Frame Dimensions:
- Height: 2.3”
- Length: 10.2”
- Width: 5.1”
This product is compatible with Glock® Gen3 G19/23 (3-Pin).
Complete Your 80% Frame in One Day
The PF930CV™-ODG Kit includes the required 80% Frame, Jig, drill bits, and end mill bit. All you need to finish your frame is a handheld drill and router or hand files! Completing your frame takes less than one hour.
Build Your Pistol Legally in All 50 States!
The PF930CV™-ODG Frame and Jig Kit is not considered a firearm. Your kit will ship straight to your front door, regardless of which state you live in! Building your pistol at home with no paperwork, background, or other federal requirements is also 100% legal in all 50 states – just be sure to check your local laws before building.
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or “assault weapons” (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily
80-Lower.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.