phone: 888-568-1771

Polymer80 PF940v2™ and PF940Cv1™ 80% Frame and Jig Kit Bundle (Black Only)

Out of Stock
  • Fast Shipping

  • Thousands of Reviews

  • 7 Day Customer Service

  • Amazing Selection

Polymer80 has long been the industry standard for 80% pistol frames. Included in this bundle pack with the PF940v2™ full-sized frame with all its upgraded features is the compact PF940Cv1™ to use in your next Glock® 19 or 23 compatible builds. The PF940v2™ is compatible with Glock® components for Gen 3 3-pin: 9mm G17, 17L, 34; .40S&W G22, 24, 35; and .357Sig G31. Similarly, the PF940Cv1™ is compatible with Glock® components for Gen 3 3-pin: 9mm G19 or the .40SW G23.

Grab the finishing jigs for your frames!

Get the build kits you need to assemble!

These frames feature an extended beavertail and thumb ledge for better control. A double-undercut trigger guard enhances comfort, allowing for a firmer grip. Lastly, engineers upgraded the 22-degree grip angle to 18 degrees. This new angle provides better recoil control and quicker follow-up! Even with a new grip angle, both the PF940v2™ and the PF940Cv1™ are still compatible with OEM and aftermarket Glock® magazines.

PF940V2™ 80% Frame Features

  • Compatible with components for 3-pin (Gen 3) G17, 17L, 22, 24, 31, 34, and G35.
  • Improved ergonomics and finish
  • Reinforced, hardened polymer
  • Factory-style grip texture

PF940Cv1™ 80% Frame Features

  • Compatible with components for 3-pin (Gen 3) Glock® 19 and G23.
  • Improved ergonomics and finish
  • Reinforced, hardened polymer
  • Factory-style grip texture

Completing Your Frame

In addition to the jig, fabricating your frame requires some basic tools. These kits do not include the other parts required to assemble your pistols once fabrication is complete. 

What's Included

  • PF940v2™ 80% Full-sized Frame
  • PF940Cv1™ 80% Compact Frame
  • 80% jig (x2)
  • Bits and instructions
  • Blank serialization plate on each frame
  • Stainless Steel Locking Block Rail (x2)
  • Stainless Steel Rear Rail Module (x2)
  • Hardened Pins for LBRS and RRM (x2)

NOTE: An end mill bit was deemed unnecessary by Polymer80 and is not included with this kit.


Not a Firearm (State Laws Vary)

Some states have banned receiver blanks and other gun parts. Please check our Shipping Restrictions before placing an order. We cannot fulfill orders in restricted states for any reason.


DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit

WARNING: Handling firearms parts and accessories can expose you to lead and other petroleum products known to the State of California to cause cancer and reproductive harm. For more information go to:

Shipping Restrictions

Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or "assault weapons" (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily. only ships within the United States. Federal legislation dictates we cannot ship our products internationally.

GLOCK® Compatible

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, Hawaii, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.