19 of 19 Items
19 of 19 Items
Grab a frame blank to start your 80% GLOCK build.
To assemble your GLOCK® kit, you need one of these 80% GLOCK® frames. Produced by Polymer80 and commonly called "P80 frames", these firearm blanks are compatible with Generation 3 and newer GLOCK® components, including factory and aftermarket GLOCK parts.
These frames are non-functional, and unfinished. They're considered firearm frame blanks, which means they cannot accept the components necessary to make them into working firearms. You, the builder, must finish fabricating the frame. Once fabrication is complete, your frame is considered a firearm under federal law, and it can accept parts like a barrel, slide, trigger, and the pins and springs needed to function.
Assemble your completed frame with a GLOCK kit.
Our available GLOCK build kits include all the parts needed to assemble your finished frame. Magazines are sold separately.
These polymer80 frames are compatible with certain factory GLOCK® handgun models. Choose the frame option below, based on the model and caliber you wish to fabricate and assemble.
Read our frame compatibility guide to learn more about these frames, and their GLOCK models and calibers.
Each 80% GLOCK frame includes a locking block rail component, and rear rail module. These two parts are required for final assembly, and work with the components you'll also need to use to assemble your frame with its corresponding GLOCK build kit.
No other assembly components are included. No drill bits, jig, or other tooling required to complete each frame is included, either -- they are sold separately.
Some states have banned 80% frames and certain firearm parts, or have otherwise restricted the sale and ownership of products we sell. So, be sure to check your local and state laws. We can’t ship our products to certain states. Please check our Shipping & Return Policy before placing an order (see restrictions).
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80% Lowers, a/k/a 80-lower.com nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At 80-Lower.com, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.
We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, Hawaii, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.