NOTE: An end mill bit was deemed unnecessary by Polymer80 and is not included with this kit.
The updated PF940v2™ now comes in Flat Dark Earth for extra customization, while coming with all the features and upgrades customers were asking for. The PF940v2™ is compatible with Glock® components for Gen 3 3-pin: 9mm G17, 17L, 34; .40S&W G22, 24, 35; and .357Sig G31.
New builder? Read the intro guide to P80 pistols.
This frame features an extended beavertail and thumb ledge for better control. A double-undercut trigger guard enhances comfort, allowing for a firmer grip. Lastly, engineers upgraded the 22-degree grip angle to 18 degrees. This new angle provides better recoil control and quicker follow-up! Even with a new grip angle, the PF940V2 is still compatible with OEM and aftermarket Glock® magazines.
PF940V2 (FDE) Polymer80 Frame Features
- Compatible with G17, 17L, 22, 24, 34, 31 (.357 SIG), 34, and G35
- Improved ergonomics and finish
- Reinforced, hardened polymer
- Factory-style grip texture
Completing Your P80 Frame
Download the PF940V2's tool list and instructions here.
In addition to the jig, fabricating your frame requires some basic tools. First-time fabricators should expect to spend one to two hours' time cutting and drilling the frame. This kit does not include the other parts required to assemble your pistol once fabrication is complete. View P80 parts kits here.
What's Included
- 80% frame
- 80% jig
- Bits and instructions
- Blank serialization plate
- Stainless Steel Locking Block Rail
- Stainless Steel Rear Rail Module
- Hardened Pins for LBRS and RRM
Not a Firearm (State Laws Vary)
Because it isn't drilled or machined and can't be made to function in its current state, the ATF doesn't consider the Polymer80 80% frame to be a firearm under federal law. The ATF describes 80% frames like these as "receiver blanks". ATF says it is legal to build a firearm for personal use with no FFL under federal law. Some states have enacted additional restrictions against this practice. Other states have banned receiver blanks and other gun parts. Please check our Shipping Restrictions before placing an order. We cannot fulfill orders in restricted states for any reason.
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
WARNING: Handling firearms parts and accessories can expose you to lead and other petroleum products known to the State of California to cause cancer and reproductive harm. For more information go to: www.P65Warnings.ca.gov
Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or "assault weapons" (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily.
80-Lower.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.
