Grab this upgraded slide and Holosun red dot for your PF940C.
We've made it easier than ever to assemble and upgrade your Polymer80 PF940C frame with this two-for-one combo slide kit. You're getting a quality, custom LFA Elite slide that's pre-cut for the included Holosun 507C-X2 red dot. Also included is a high-quality barrel available with or without threads.
The Holosun 507C-X2
The 507C-X2 is one of Holosun's most popular handgun red dot, and for good reason: This incredibly tough little reflex sight provides a crisp, accurate dot-and-halo reticle with loads of brightness, plus a generous field of view. It's even powered by solar, providing infinite operating life regardless of the battery's condition. Nightvision-compatible and 100% waterproof, the rugged 507C is the perfect red dot for your P80 build.
What's Included:
- Firing pin
- Firing pin spring
- Firing pin spring cup
- Firing pin safety
- Firing pin safety spring
- 9mm Extractor
- Extractor depressor plunger
- Extractor depressor plunger spring
- Channel liner
- Spacer Sleeve
- Steel cover plate
- Polymer guide rod (guide rod, washer, screw)
- Guide rod spring
- Holosun red dot
Ported, Serrated, Optic-Cut Slide
The included LFA Elite slide allows for quick and easy completion of your 80% pistol build with a custom unit that's ready for a red dot. Machined serrations allow for easy handling and control, while a 416 stainless steel billet construction features machining to factory specifications.
- Heat treated to 41-44 on the Rockwell C scale
- Finished with a matte black powdercoat finish
- Factory internal dimensions
- Factory Glock®-compatible sight cuts
- For Polymer80 and Gen 3 pistols
Gen 3 Barrel
Made with proper US craftsmanship, this Gen 3 barrel boasts the highest level of quality and accuracy you’ll ever find in any full-sized pistol. Manufactured from heat-treated 416R stainless, this Gen3 barrel will guarantee consistent shop shot groups and accuracy when it counts most.
- Rifled with 1:10 rate of twist
- Choose black nitride or stainless finish
- Choose threaded (1/2x28) or non-threaded
Slide Kit Instructions
Assembling your custom GLOCK® slide takes 15 to 30 minutes, and requires a few basic tools:
- Channel Liner Tool
- Small Punch Set
- Gunsmith Hammer
Follow our written instructions, or watch our how-to video:
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a 80-lower.com nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
WARNING: Handling firearms parts and accessories can expose you to lead and other petroleum products known to the State of California to cause cancer and reproductive harm. For more information go to: www.P65Warnings.ca.gov
Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or "assault weapons" (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily.
80-Lower.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.
