6.5 Creedmoor Rifle Kit (24” Stainless Steel Barrel & 17” M-Lok Handguard, Side-Charged) w/ 80% Lower (1:8 Twist)



If you want to reach out and ring steel at 800 meters without a bolt action, you need to start with the right cartridge: 6.5 Creedmoor. Pack in that high ballistic coefficient and velocity in the right platform, and you’ll be the proud owner of a tack-driving bench rifle. That’s what we came up with in this match-grade 6.5 Creedmoor AR-15 rifle kit. 

Sporting a 24” heavy barrel forged with straight flutes and precision-rifled from Crucible 416R stainless, this is the kit you need to count the seconds between the trigger pull and the gong. Inside is a 1:8 twist optimized for all 120- to 155-grain Match loads. A free-float M-Lok handguard provides plenty of room for that bipod and all accessories. To keep your eyes downrange between reloads, the charging handle was moved from the top of the receiver to the ejection port itself.

What’s Included & Specifications


  • Chamber:  6.5 Creedmoor
  • Contour:  Heavy
  • Length: 24”
  • Twist Rate:  1:8
  • Gas System:  Rifle
  • Gas Port:  0.936”
  • Gas Hole Dia.:  0.093”
  • Muzzle Threads:  5/8x24
  • Feed Ramps:  AR-10
  • Material:  Crucible 416R Stainless
  • Finish:  Stainless
  • Process:  Button Rifled
  • Flutes:  Straight
  • Extension:  AR-10
  • Muzzle:  Vortex Flash Hider


  • Attachment System:  M-Lok
  • Finish:  Type III Hardcoat Anodized (Mil-Spec)
  • Top Rail:  M1913 Picatinny
  • Material:  Billet 6061-T6 Aluminum
  • Attachment:  Barrel Nut 

Stripped Upper Receiver

  • Profile:  LR-308 Flattop w/ Picatinny
  • Material:  Forged 7075-T6 Aluminum
  • Finish:  Type III Hardcoat Anodized (Mil-Spec)

Bolt Carrier Group

  • Profile:  AR-10
  • Steel:  Carpenter No. 158 (Mil-Spec)
  • Exterior:  Phosphate Coating
  • Interior:  Chrome-Lined
  • Gas Key:  Staked, Chromed
  • Charging Handle: Ejection Port

Lower Receiver Assembly

  • Buttstock:  Six-Position Adjustable (M4-type)
  • Buffer Tube:  Mil-Spec, Forged Aluminum
  • Buffer:  Collapsible Stock 3.8-Ounce “Shorty” Buffer
  • Parts Kit:  AR-10 / LR-308 Parts Kit w/ Pistol Grip

Lower Receiver:

  •  Optional Billet LR-308 80% Lower
No FFL required  Made in the USA  Lifetime Warranty

Shipping Restrictions

Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or “assault weapons” (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily

80-Lower.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.