ORDERS SHIP BY THE NEXT BUSINESS DAY!
Real time inventory.  No backorders.

.300 Blackout AR 15 Side-Charging Rifle Kit - 16" Stainless and Black Nitride Fluted Heavy Barrel, 1:8 Twist Rate with 12" M-Lok Handguard

$499.99
SKU:
UASCH300CHB1618SSBCF-12M3_AR15-LPK_M4-STOCK_AR15-BTA

Description

Please note: We strive to provide the most accurate photographs of our product wherever possible. Due to availability limitations and supply chain constraints, slight variations of the handguard of this upper assembly may occur in the aesthetics of the skeletonizations in between the M-Lok sections.

If you've caught that certain spark, and now you're looking to build your own AR-15 chambered in .300BLK (.300 AAC blackout), you might as well do it with some damned style. Check out this .300BLK built kit. The core of its attitude is a 16-inch stainless steel barrel that's been coated in black nitride and given bear claw fluting for that extra in-your-face flair. Plus, it's side-charging, so your new baby won't be boring. It's also got a 12" free-floating M-Lok handguard on which to mount your light, laser, or whatever else.

Plus, we give you most of the extras you'll need to complete the whole kit. You get a mil-spec buffer tube assembly and butt stock that adjusts in the standard six positions and of course a mil-spec lower parts kit. All you need to do is finish and add your own 80% lower either in 7075 forged aluminum or 6061 T6 billet aluminum which you can find here. Then of course, top it off with the backup sights or optic of your choice. Please note, mags and ammo are not included.

Here's the beginner's guide to 80% lowers.

300 Blackout AR Kit Specs

Barrel

  • Chamber: .300 AAC Blackout
  • Contour: Heavy
  • Length: 16”
  • Twist Rate: 1:8
  • Gas System: Carbine
  • Gas Port: 0.750”
  • Gas Hole Dia.: 0.070”
  • Muzzle Threads: 5/8x24
  • Feed Ramps: M4
  • Material: 4150 CMV
  • Finish: Stainless Steel and Black Nitride
  • Process: Button Rifled
  • Lining: None
  • Extension: M4
  • Muzzle: A2 “Birdcage” Flash Hider

Handguard

  • Attachment System: 12" M-Lok
  • Finish: Type III Hardcoat Anodized (Mil-Spec)
  • Top Rail: M1913 Picatinny
  • Material: Billet 6061-T6 Aluminum
  • Attachment: Barrel Nut 

Stripped Upper Receiver

  • Profile: M4 Flattop
  • Material: Forged 7075-T6 Aluminum
  • Finish: Type III Hardcoat Anodized (Mil-Spec)

Bolt Carrier Group

  • Profile: M16/Full-Auto
  • Steel: 9310 Tool, HPT/MPI-tested
  • Exterior: Phosphate Coating
  • Interior: Chrome-Lined
  • Gas Key: Staked, Chromed
  • Charging Handle: Included

Lower Receiver Parts

  • Buffer System: Mil-spec, Carbine
  • Buttstock: Mil-spec, M4-type
  • Parts Kit: Mil-spec, single-stage

Receiver sold separately

No FFL or serialization is required to fabricate a receiver under federal law. However, state laws vary. Some states require serialization or have banned 80% lowers and gun-making kits. We encourage each and every builder to perform their own research about the state and federal laws that apply to them.

Shipping Restrictions

Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or “assault weapons” (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily

80-Lower.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, Hawaii, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.