6.5 Creedmoor Rifle Kit (20” Nitride Barrel & 12” M-Lok Handguard) w/ 80% Lower (1:8 Twist)

$1,249.99
$999.99
SKU:
UB65-FML308.12-RKBL

Description

Get ready to reach out to around 700 meters with the new AR you just built. Get better ballistics and performance with your AR build by getting one chambered in 6.5 Creedmoor.

The key to this kit’s accuracy is its 20” barrel. Made from 4150 steel, this barrel pushes 6.5 Creedmoor to its limits. Helping you make tight shot groups is a quality CMMG Lower Parts Kit. Keeping things comfortable is a six-position M4 buttstock mated to a shorty buffer tube. Cycling all those rounds is an M16 Full-Auto bolt carrier group.

6.5 Creedmoor Rifle Kit Specs:

Barrel Length: 20″
Barrel Profile: Light contour
Gas System: Mid-length
Barrel Steel: 4150, match-grade
Barrel Finish: Nitride
Muzzle Thread: 5/8-24
Chamber: 6.5 Creedmoor 
Twist Rate: 1:8
Diameter at Gas Block: 0.750”
Gas Block Type: Low-profile
Muzzle Device: A2 flash hider
Receiver Material: Forged 7075 T6
Receiver Type: Low-profile w/ Picatinny
Handguard Type: 12” M-Lok
Bolt Carrier Group Included: Yes
Bolt Steel: Shot-peened, MPI-tested, 9310
Bolt Carrier Profile: M16 Full-auto
Charging Handle Included: Yes

6.5 Creedmoor Rifle Kit Features:

  • Complete built kit (w/ optional 80% lower)
  • Features match-grade 4150 barrel
  • No FFL required to purchase
  • Ships straight to your front door
  • Upper is pre-built and ready to fire
  • Mil-spec fittings and finishes
  • Proudly built in the U.S.A.
  • Backed by a Lifetime Warranty

Barrel: Nitride-coated, match-grade, 20”, chambered in 6.5 Creedmoor. Made of 4150 steel. Features 1:8 twist rate and rifle-length gas system. Includes 12” M-Lok handguard, 0.750″ diameter low profile gas block, and .308 sized A2 "birdcage" style muzzle brake.

Upper: Mil-spec, made of forged 7075 T6 aluminum. Hard-coat anodized (Type III).

Bolt: Mil-spec, M16 full-auto. Shot-peened, made of 9310 steel. Includes 8620 gas carrier.

80% Lower: Complete with an optional 80% lower. All lowers include mil-spec fittings and hard-coat anodizing.

Lower Parts Kit: Includes mil-spec CMMG lower parts kit. Features six-position M4 buttstock, shorty buffer tube, and buffer.

Charging handle: Standard 7075 Forged charging handle.

Please note: If completing your 6.5 Creedmoor build using the optional 80% lower, please select an 80 lower jig from our available options.

No FFL required  Made in the USA  Lifetime Warranty

Shipping Restrictions

Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or “assault weapons” (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily

80-Lower.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.