Lifetime Warranty Lifetime Warranty Made in the USA Made in the USA FREE Shipping on $325+ Free Shipping on all orders $325+!
80% L❂WERS

Router Jig PRO Multi Platform (80% Lower Jig) by 5D Tactical (AR-15 / AR-10 / AR-9)

$384.95 $314.95 (You Save $70.00)

Router Jig PRO Multi Platform (80% Lower Jig) by 5D Tactical (AR-15 / AR-10 / AR-9)
Router Jig PRO Multi Platform (80% Lower Jig) by 5D Tactical (AR-15 / AR-10 / AR-9)
Clear
Save For Later
Save For Later

Free Shipping on all orders $325+!

SKU: 5D-PMJ_5D-PK300A

Description

PLEASE NOTE: THE TOOLING FOR THE 5D TACTICAL ROUTER JIG PRO DEPENDS ON THE MODEL/BRAND OF YOUR ROUTER. PLEASE SEE THE “SIZING CHART” BELOW TO MAKE THE CORRECT TOOLING OPTION. 

The Router Jig PRO by 5D Tactical is a multi-platform jig capable of completing AR 15, AR 10 (.308) and AR 9 80 percent lowers. The jig is guaranteed to universally fit all forged, billet and even polymer 80 percent lower receivers. The Router Jig PRO Multi-Platform is pioneering the 80% lower jig market by being the first jig to guarantee fitment of any and all AR 10 80 lowers.

The Router Jig PRO is constructed of extra thick, heat-treated solid steel plates. This construction method is designed to prevent the need to ever have to replace any plates – including the top and side plates. The side plates, alone, are 1.5” thick steel with built-in hardened steel drill bushings. The 5D Tactical Router Jig PRO Multi-Platform is the last 80% lower jig you will ever need for any of your gunsmithing projects!

How easy is it? Read the 5D Tactical Router Jig PRO Multi Platform (AR-15 / AR-10 / AR-9) Instruction Manual

[youtube https://www.youtube.com/watch?v=YalmaxL9dJw]

Lightning Fast:

  • Capable of finishing an 80% lower in less than 15 minutes
  • Only requires one pilot hole to be drilled prior to milling with your router
  • Patented ReadyMILL end mill bit is the strongest milling tool for finishing an 80% lower
  • Shop-Vac attachment cuts clean up time by 90% and creates smoother, safer milling surfaces
  • Most of the assembly requires only 14 Phillips head screws (included) requiring fewer tools and setup time

110% Universal:

  • GUARANTEED to fit ANY AR-15, AR-10, .308, AR-9 80% lower receiver

Tougher Than Ever:

  • 1.5” side plates are twice as thick as any other 80% lower jig
  • 1.5” side plates contain built-in hardened steel bushing designed to never wear out
  • No-touch side plates guarantee fitment of any lower receiver
  • Heat-treated, extra-hardened steel plates constructed to last forever
  • High-speed bearing can be switched out with three screws

Dummy-Proof:

  • Integrated router plate guide pins fit within grooves on the jig top plate to ensure perfect milling of fire control group cavity
  • Router plate guides pins prevent from accidental slips causing damage to side plates of jig and side walls of 80% lower
  • Built-in drill bit depth guides to improve accuracy of milling depths

Perfect Fitment:

  • 80% lower is mounted to the jig using the front takedown pin and buffer tube to ensure perfect center for drilling and milling

You must purchase the correct ReadyMILL™ for your router. Your router’s model number can be found on the label. 

PLEASE NOTE: THE TOOLING FOR THE 5D TACTICAL ROUTER JIG PRO DEPENDS ON THE MODEL/BRAND OF YOUR ROUTER. PLEASE SEE THE “SIZING CHART” BELOW TO MAKE THE CORRECT TOOLING OPTION. 

This is the complete toolkit needed for finishing an 80% lower receiver with the 5D Tactical Router Jig PRO. The patent-pending ReadyMILL comes packaged with all the drill bits necessary for finishing an 80% lower receiver at home.
This 5D Router Jig PRO Toolkit includes:

  • (1) ReadyMILL (Choose size below based on your router model)
  • (1) 3/8″ Black and Gold High-Speed Steel Drill Bit
  • (1) 21/64″ Black and Gold High-Speed Drill Bit
  • (1) 5/32″ Black and Gold High-Speed Drill Bit

Sizing Guide:

Tooling Set ATooling Set BTooling Set C

Tooling Set D (Requires Full-Size Router Plate)

Bosch PR10EBosch PR20EV
DeWalt DWE6000
Porter Cable 6430
Porter Cable 6435

Rigid R24012

Craftsman 28212
DeWalt DWP611
Porter Cable 450

Makita RT0701C

Bosch 1617EV
Bosch 1617EVS
Craftsman 2767
Craftsman 27683
Craftsman 50429
DeWalt DW616
DeWalt DW618

 

The patent-pending ReadyMILL is the first and only Router-Ready End Mill which threads directly to your router, eliminating the need for the collet and further stabilizes your end mill bit even more.

Please Note: If you will be drilling your trigger pilot hole on a 7075 lower receiver, we highly recommend the use of a drill press. Trying to drill this hole using a hand drill is very difficult given the hardness of 7075 aluminum. If you are using a 6061 lower receiver, you may be able to drill the trigger pilot hole using your hand drill and avoid the need for a drill press, but we still highly recommend the use of a drill press to ensure that your holes are perfectly straight.

Please note this Tool Kit is for the Router Jig PRO only. The tooling for the Original 5D Tactical Router Jig can be found here.

How easy is it? Read the 5D Tactical Router Jig PRO Multi Platform (AR-15 / AR-10 / AR-9) Instruction Manual

No FFL required Made in the USA Lifetime Warranty

Router Jig PRO Multi Platform (80% Lower Jig) by 5D Tactical (AR-15 / AR-10 / AR-9)

$384.95 $314.95 (You Save $70 )

$384.95 $314.95 (You Save $70 )
Clear
Save For Later
Save For Later

Already 13 persons shown interest.

Free Shipping on all orders $325+!

Customer Reviews

4.6 Based on 58 Reviews
5 ★
86% 
50
4 ★
3% 
2
3 ★
3% 
2
2 ★
0% 
0
1 ★
7% 
4
Customer Photos
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

  • shipping
  • directions
  • instructions
  • finish
  • setup
  • tool
  • results
  • photo
A
06/22/2019
Anonymous
US

Easy to use. Even for a beginner

Easy to use. Instructions helped a lot. As long as you can use tools it’s not hard.

Anonymous verified customer review of Router Jig PRO Multi Platform (80% Lower Jig) by 5D Tactical (AR-15 / AR-10 / AR-9)Anonymous verified customer review of Router Jig PRO Multi Platform (80% Lower Jig) by 5D Tactical (AR-15 / AR-10 / AR-9)
CG
06/06/2019
Christopher G.
US

Fast shipping

Great shipping and I appreciated the text notifications/updates. UPS's tracking sucks, but 80% lower kept me up to date.All parts seem to be well made, no blemishes.

TN
05/07/2019
Ted N.
US

Quality product. Quality results.

Great company to do business with. Fast shipping. Effortless machining experience with exceptional results. Thankyou 80% lowers.

MM
05/06/2019
Mark M.
US

Exceeded My Expectations

What a magnificent hunk of solid metal. The 5D Jig is a masterpiece of fit and function; so easy to assemble and to use. I had never milled an AR lower before, so I was a bit apprehensive. I shouldn't have been. From the moment of unpacking the box and inventorying the contents to a complete, perfectly milled lower took me just over an hour. That included studying the instructions. I am blown away.

A
04/20/2019
Anonymous
US

Done and done

The only issue I had was with the screws for the guide pins were a little long and would catch on the jig when moving the router to the back end of the receiver. BUT it still did the job and any imperfections came from my own doing (like not waiting till the router completely stops before lifting it up and out of the receiver. Very easy to use. Mine didnt come with instructions on how to set up the router but YouTube has vids and that doesnt change that the jig works great. Just take your time and enjoy the process and there's no way you'd be disappointed. And move your router in a clockwise motion. The vids and pics of receivers that look butchered is due to improper use of the tool, the jig works.

NEVER MISS ANOTHER DEAL

Sign-up for exclusive discounts, new product releases and updates from 80-lower.com.

100% Satisfaction
Guaranteed

Customer Service is our passion and we are here to answer any questions you have.
888-623-6480

Shop With PRIDE

Shop With Confidence

Secure Payment

Left Menu IconMENU
Right Menu Icon
X

Customers who shopped for Router Jig PRO Multi Platform (80% Lower Jig) by 5D Tactical (AR-15 / AR-10 / AR-9) also shopped for:


Bench Vise Jaw Pads
Bench Vise Jaw Pads $39.99 $3.18 (You Save $36.81)

In stock

Armorer's Wrench | AR-15
Armorer's Wrench | AR-15 $34.95 $29.95 (You Save $5.00)
Premium Lower Parts Kit | AR-15
Premium Lower Parts Kit | AR-15 $119.95 $99.95 (You Save $20.00)

In stock

AR-15 Punch Set | Roll Pin Punches
AR-15 Punch Set | Roll Pin Punches $33.95 $24.95 (You Save $9.00)

In stock

80% Lowers Fire/Safe Marked (3-pack)
80% Lowers Fire/Safe Marked (3-pack) $233.95 $179.99 (You Save $53.96)
5D Tactical Jig PRO ReadyMILL End Mill Bit
5D Tactical Jig PRO ReadyMILL End Mill Bit $54.99 $44.99 (You Save $10.00)
Clear