GLOCK® 17 compatible RMR optic cut slide build kit finished in FDE Cerakote
Give your G17 pistol an upgrade with an RMR-cut slide kit. Constructed from 416 stainless steel billet and machined to Glock® OEM specifications. Featuring front and rear serrations, iron sight mounts, RMR optic cut-out, and a quality upper parts kit. This slide kit is ready for your favorite reflex sight or compatible iron sights. Most importantly, it's coated in a durable Flat Dark Earth Cerakote finish that's built to last.
What's Included:
Slide
This custom-machined slide features an RMR optic cut for better target acquisition and improved accuracy. The RMR optic cut is arguably the most common slide red dot mount. It's compatible with a wide range of other pistol red dots, including Holosun, Swampfox, and of course, Trijicon's ever popular RMR. Finished with an Elite Series FDE Cerakote to improve wear and corrosion resistance. Upgraded, angled front and rear serrations also provide better handling and grip, while a 416 stainless steel billet construction features machining to factory specifications.
- Platform: G17
- Caliber: 9mm
- Material: 416R Stainless
- Finish: Elite Series FDE Cerakote
- Compatibility: GLOCK® 17 Gen 1-3
- Features:
- OEM internal dimensions
- RMR optic cut
- Front & rear angled serrations
- Compatible w/ factory iron sights
Barrel:
Made with proper US craftsmanship, these Gen3 barrels boast the highest level of quality and accuracy you’ll ever find in any mid-sized pistol. Manufactured from heat-treated 416R stainless, these barrels guarantee consistent shot groups and accuracy when it counts most.
- Caliber: 9mm
- Twist Rate: 1:10
- Material: 416R Stainless
- Finish: Black Nitride
- Choose your barrel: Non-Threaded or Threaded w/ Thread Protector
Slide Parts Kit Includes:
- Firing pin
- Firing pin spring
- Firing pin spring cup
- Firing pin safety
- Firing pin safety spring
- 9mm Extractor
- Extractor depressor plunger
- Extractor depressor plunger spring
- Channel liner
- Spacer Sleeve
- Steel cover plate
- Polymer guide rod (guide rod, washer, screw)
- Guide rod spring
Slide Kit Instructions
Assembling your custom GLOCK® slide takes 15 to 30 minutes, and requires a few basic tools:
- Channel Liner Tool
- Small Punch Set
- Gunsmith Hammer
Download our step-by-step instructions here! It's free and printable.
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a 80-lower.com nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
WARNING: Handling firearms parts and accessories can expose you to lead and other petroleum products known to the State of California to cause cancer and reproductive harm. For more information go to: www.P65Warnings.ca.gov
Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or "assault weapons" (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily.
80-Lower.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.
- Caliber:
- 9mm
- Size:
- Full
- Platform:
- GLOCK® Compatible
- Model:
- G17
