LR-308 Rifle Kit (18” Parkerized SOCOM Barrel & 15” M-Lok Handguard) w/ 80% Lower (1:10 Twist)



Are you ready to step up your .308WIN game? Then snatch up this rifle kit. You get all the necessary parts you need to complete a solid, intermediate-level LR-308 rifle. This kit's upper assembly affords you a 18" mid-weight SOCOM-profiled barrel to better handle a higher number of rounds put downrange. It also comes with a 15" M-Lok handguard for mounting a bipod, foregrip, or whatever else. All you'll need after assembly are either backup sights or optic of your choice, mags, and ammo. Get serious about your .308 shooting. Get this kit and start reaching way out and punching paper today.

LR-308 Rifle Kit Specs:

Barrel Length: 18"

Barrel Profile: SOCOM

Gas System: Mid-length

Barrel Steel: 4150 CMV

Barrel Finish: Parkerization

Muzzle Thread: 5/8-24

Chamber: .308 Winchester

Twist Rate: 1:10

Diameter at Gas Block: 0.750”

Gas Block Type: Low-profile

Muzzle Device: Flash hider

Receiver Material: Forged 7075 T6

Receiver Type: Flat-top w/ picatinny

Handguard Type: 15" free-floating M-Lok

Bolt Carrier Group Included: Yes

Bolt Steel: Shot-peened, MPI-tested, 9310

Bolt Carrier Profile: M16 Full-auto

Charging Handle Included: Yes

LR-308 Rifle Kit Features:

  • Compatible with all DPMS .308/LR-308 parts
  • Features 4150, parkerized barrel
  • Includes all the parts you need to build an LR-308
  • Not considered a firearm, no FFL required
  • Upper ships pre-built, ready to fire
  • Proudly made in the U.S.A.
  • Backed by Lifetime Warranty

Barrel: Parkerized, 18”, chambered in .308 Winchester. Made of 4150 CMV steel. Features 1:10 twist rate and mid-length gas system. Includes 15” free-floating M-Lok handguard, 0.750" diameter low profile gas block, and flash hider.

Upper: Mil-spec, made of forged 7075 T6 aluminum. Hard-coat anodized (Type III). Bolt: Mil-spec, M16 full-auto. Shot-peened, made of 9310 steel. Includes 8620 gas carrier.

80% Lower: Complete with an optional 80% lower. All lowers include mil-spec fittings and hard-coat anodizing.

Lower Parts Kit: Includes mil-spec CMMG lower parts kit. Features six-position M4 buttstock, shorty buffer tube, and .308 buffer.

Charging handle: Standard 7075 Forged charging handle.

Please note: If completing your LR-308 build using the optional 80% lower, please select an 80 lower jig from our available options.

No FFL required  Made in the USA  Lifetime Warranty

Shipping Restrictions

Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or “assault weapons” (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily only ships within the United States. Federal legislation dictates we cannot ship our products internationally.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.