Real time inventory. No backorders. Ships within 3 - 5 Business Days!

16 of 16 Items
16 of 16 Items

All the latest GLOCK® 80% Frames and Jigs from Polymer80.

The Glock 22 is arguably one of the best handguns ever made, issued to police globally. And the G17 is a high-performing compact pistol, perfect for daily carry.

But you love 80% builds and you don't want to just buy any old G-series pistol. You want to build one. From scratch, piece by piece, customizing and upgrading your new pistol before you send those first rounds downrange. That's why we've kept a strong partnership with Polymer80, one of the top makers of GLOCK®-compatible 80% frames, jigs, and pistol parts kits.

Grab a Frame & Jig

Building your P80 handgun begins with grabbing the 80% frame/jig combo that corresponds with the GLOCK® model you wish to own:

  • PF940C is compatible with G19, G23, G32, and G38.
  • PF940v2 is compatible with G17, G22, G24, G31, G34, and G35.
  • PF940SC is compatible with G26, G27.
  • PF9SS is compatible with GLOCK 43.

Fabricating Your 80% GLOCK

Fabrication requires just basic knowledge of hand tools, like a power drill and files, and the ability to follow basic mechanical instructions. Check out the instructional video below for further information, and follow along with our instructional picture guide here!


"Is this legal in my state?"

Counter to federal law, some anti-gun states have banned the sale, distribution, ownership, and/or fabrication of 80% frames, like the units available here. We cannot ship to the following states under any circumstances. There can be no exceptions made for military or law enforcement:

  • Hawaii
  • New Jersey
  • New York
  • Connecticut
  • Washington
  • Rhode Island
  • Delaware
  • Washington, D.C.
  • San Francisco
  • San Diego
  • Los Angeles

"What comes with my P80 frame?"

You will receive the following components, at minimum, with your kit:

  • 80% frame
  • 80% jig
  • Drill bits
  • Instructions
  • Locking block rail system (LBRS)
  • Rear Rail Module (RRM)
  • LBRS and RRM pins

"What do I need to finish my 80% GLOCK® build?"

If you've build or bought an AR-15 or your already completed a rifle 80% build, think of the P80 build process as the same thing: Once your frame is fabricated, you will need to obtain a trigger and frame parts (lower parts kit) and slide, barrel, and operating rod with spring to complete your GLOCK "lower" (frame with trigger installed) with its "upper" (complete slide assembly).

Thankfully, you can grab a quality P80 lower parts kit! Pair it up with any custom OEM or aftermarket GLOCK parts, or browse our available GLOCK parts to make things even easier. Complete build kits are listed which include all components necessary for assembling your frame.


DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80% Lowers, a/k/a nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit

DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, Hawaii, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.