A sleek, Flat Dark Earth Cerakote, G43 pistol kit.
This "OEM +" Glock® 43 kit is the perfect upgrade for you G43 compatible build. It includes a complete upper parts kit and lower parts kit. Upon completion, all you'll need are the sights of your choice and of course mags and ammo. With this kit, please specify whether you'd like your barrel finished in black nitride or stainless steel. See below for more info.
NOTE: This build kit gives you the option to select either a black nitride barrel or a stainless steel barrel with your kit.
Glock® 43 Compatible Slide
- Heat treated from 416R stainless steel
- Heat treated to 42 HRC
- Coated in FDE Cerakote
- Internal dimensions meet OEM specs
- Fits Glock® 43 and 43X
- Uses standard OEM front and rear dovetail sights
- Front and Rear serrations for better grip and traction
- 9mm
Upper Parts Kit for Glock® 43
- 100% Made in the USA
- Extractor
- Recoil/Guide Rod Assembly
- Firing Pin Assembly
- Slide Cover Plate
- Depressor Plunger
- Firing Pin Safety/Safety Spring
Lower Parts Kit for Glock® 43
- Connector
- Slide Stop Release with Spring
- Magazine Release (May be extended depending on inventory)
- Magazine Release Spring
- Slide LockSlide Lock Spring
- Trigger Housing Pin
- Trigger Housing with Ejector (may be from P80 depending on inventory)
- Trigger Pin
- Trigger Spring
- Trigger with Trigger Bar
Glock® 43 Compatible 9mm Barrel (Black)
- Fits Glock® 43 models only
- Designed for lead, plated, or jacketed ammunition
- Certified, stress relieved 416 stainless steel
- Button rifled, three stage honed bore
- Industry recognized SBN premium coating (SBN is Salt Bath Nitride, similar to Tennifer)
- Heat treated to RC 40-42, then SBN coating increases surface hardness to RC 60
- Exacting tolerances allow for drop in installation
- Fluting creates path for heat and debris to escape
- MADE IN THE USA!
Glock® 43 Compatible 9mm Barrel (Stainless)
- Ready to use, pre-fit, drop-in
- No gunsmithing required
- Precision machined from heat treated 416R stainless forgings
- Oversized lock-up area produces greater shot-to-shot accuracy
- Tighter than factory spec dimensions
- Match grade broach cut rifling and target crown
- Maximum chamber support
- Improved feed ramp design
- Diamond turned exterior
- Okay to use lead, plated or jacketed bullets
- Fits Glock® Gen 1-4 (does not fit Gen5)
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a 80-lower.com nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
WARNING: Handling firearms parts and accessories can expose you to lead and other petroleum products known to the State of California to cause cancer and reproductive harm. For more information go to: www.P65Warnings.ca.gov
Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or "assault weapons" (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily.
80-Lower.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.
- Platform:
- GLOCK® Compatible
- Caliber:
- 9mm
- Size:
- Micro
- Model:
- G43
