Subcompact Pistol Jig Kit

Subcompact Pistol Jig Kit

Want a subcompact pistol for daily carry? Why not build it from the ground up? Using a Subcompact 80% Pistol Jig Kit, you'll receive all the parts and tools required to fabricate your new firearm from scratch, installing and mastering every component for confident daily carry. You'll receive quality Gen3 Glock® components, an upgraded P80 subcompact frame, the jig and bits required to fabricate the 80% frame, and easy-to-follow instructions.

The Subcompact 80% Pistol Jig Kit Includes:

P80 Frame Finishing Jig. The jig is the most important piece of this puzzle. It allows you to legally fabricate a functional Glock®-compatible pistol frame at home using basic tools: A Dremel or snips, some round files or sand paper, and a small vise. Here's a guide that shows how to complete your full-size 80% pistol frame.

Drill bits for 80% frame pin holes. You'll need to drill a few holes in the frame blank so you can install pins that secure the trigger and parts kits. To ensure your holes are drilled precisely and to the right diameter, the jig includes the bits for each kit and set of components.

Polymer80 Pistol Frame. Polymer80 has taken the Glock design and made some upgrades with this frame blank. It sports a a new wrap-around grip texture, a more comfortable grip angle, a double-undercut trigger guard for better grip and control, and it works with all Glock® gen3 components, providing you with the widest array of custom parts options.

Gen3 Pistol Build Components. Each Jig Kit includes all the parts you need to assemble your finished P80 frame into a full-size handgun: Front- and rear-cut slide, 1:10-twist nitrided barrel with target crown, factory-spec frame and parts kits, and a free lockbox for carrying your new shooter.

"OEM" Glock® vs. Kit Compatibility

The Polymer PF940C 80% frame you receive with your kit is designed to interface with all OEM and aftermarket Gen3 Glock® 26 and 27 components.

Subcompact Pistol Jig Kit Features:

  • NO FFL Required
  • No experience required!
  • Easy-to-follow instructions included
  • 80% frame is completed with simple tools
  • Includes all parts for assembling a full-size pistol
  • All parts OEM in quality, compatible with Gen3 Glock® parts
  • All parts, jig, and frame proudly made in the USA

Not Firearms Under Federal Law

Unlike finished handgun and rifle receivers and frames, the ATF and federal law do not recognize these 80% handgun frames as firearms. These units are considered firearm blanks, non-functioning gun parts that are not regulated as guns. That means you don't need to order your frame through an FFL, pay any dealer or transfer fees, or conduct a background check. Some states have banned 80% lowers and certain firearm parts, or have otherwise restricted the sale and ownership of products we sell. So, be sure to check your local and state laws. We can’t ship our products to certain states. Please check our Shipping & Return Policy before placing an order (see restrictions).

Your custom subcompact pistol build awaits.

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit

DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.

Compare Selected

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.