Lifetime Warranty Lifetime Warranty Made in the USA Made in the USA FREE Shipping on $325+ Free Shipping on all orders $325+!

Premium 80% Lower Fire/Safe Marked Billet (1-Pack) & Easy Jig Gen 2 with Tooling

$529.95 $399.95 (You Save $130.00)

Premium 80% Lower Fire/Safe Marked Billet (1-Pack) & Easy Jig Gen 2 with Tooling
Forged
Save For Later
Save For Later

Free Shipping on all orders $325+!

SKU: EP-EJG2MP_EP-EJG2TK_AR15-BLT-BLK-Fire-Safe

Description

 

The Premium 80% Lower Fire/Safe Marked Billet has been redesigned with YOU in mind. The Premium 80% Billet has been enhanced and now offers a threaded bolt catch release hole as well as a threaded rear takedown detent hole. These enhancements allow for easy and fluid install of your AR Lower parts kit components, ending some of the most frustrating aspects of your 80% lower build. Each Premium 80% Lower Billet will come with the needed screws and hex key for install.

(1) Black Fire/Safe Marked Billet 80% Lower Receiver:

  • Color: Anodized Black
  • 100% Mil-Spec
  • Quantity: 1
  • Fire/Safe Marked: Yes
  • Billet 6061-T6 Aluminum
  • Threaded Bolt Catch Hole
  • Threaded Rear Takedown Detent Hole
  • Screws and Hex Key
  • Broached Magwell
  • Enhanced, heavy duty trigger guard
  • 100% Made in the USA
  • NO FFL REQUIRED

80% Lower Jig (Easy Jig Gen 2) with Tooling:

Meet the fastest 80% lower jig on the face of the Earth. Just when you thought jigs couldn’t get any better, 80% Arms comes out with the Easy Jig Gen 2 and totally blows you away. There is nothing “minor” about the changes implemented in the Easy Jig Gen 2. Built for every 80 percent lower ever made, speed, re-use, universality, durability and user-friendliness, this 80% lower jig accomplishes that and so much more.

The Easy Jig Gen 2 Multi-Platform Jig is the most revolutionary and most important jig created since the creation of the original Easy Jig (Easy Jig Gen 1). With over 3 years of learning, knowledge and overall refinement, the Easy Jig Gen 2 is finally available to the public.

Friends, meet the Easy Jig Gen 2 Multi-Platform Jig – The most universal, least amount of labor, least amount of time, easiest 80% lower jig made. Ever.

Wildly Universal:

  • Compatible with ANY manufacturer’s AR-15, DPMS Gen 1 .308 (LR-308) and AR-9 80 percent lower
  • Converts from AR-15 to LR-308 jig in a few seconds

Insanely Easy:

  • Integrated measuring guides
  • No drill press required
  • Includes how-to manual, instructions, and link to video instructions

Freaky Fast:

  • Complete 80 percent lowers in less than 30 minutes
  • 90% less drilling than competing 80% lower jigs
  • No jig disassembly required to remove 80 lower
  • Insert and remove 80 percent lower in less than 10 seconds
  • Reduce clean-up time with Shop-Vac buffer tube attachment

Crazy Durable:

  • Drilling surfaces are constructed of hardened steel
  • Side plates constructed of solid steel
  • Router plate design eliminates end mill from touching jig

Drill bits included:

  • 1) 3/8 inch drill bit
  • 1) 5/32 inch drill bit
  • 1) 21/64 inch drill bit

End mill bit included:

  • 1) 5/16 inch end mill bit – solid carbide with ¼ inch shank (to fit into a compact router)

Note: It is recommended that you have 1 end mill bit for every 3 80% lowers you plan to complete.

No FFL is required to purchase this lower receiver. This billet 6061 aluminum 80% lower receiver is not considered a firearm and is compliant with the gun control act of 1968 not classified as a firearm as defined in 18 U.S.C. 921(a)(3).

No FFL required Made in the USA Lifetime Warranty

Premium 80% Lower Fire/Safe Marked Billet (1-Pack) & Easy Jig Gen 2 with Tooling

$529.95 $399.95 (You Save $130.00)

Save For Later
Save For Later

Free Shipping on all orders $325+!

Customer Reviews

5 Based on 7 reviews
5 ★
100% 
7
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

  • execution
  • polymer
  • vise
  • trouble
  • router trouble
  • time
  • spot
  • tooling
  • build
  • directions
W
02/23/2019
Windin

Basic AR build

Billet lower gen 2 was very nice, loved the Jig, tooling was fine. Taking your time is the key. Build turned out nice.

A
02/23/2019
Anonymous
US

lower finished

I just finished my new lower this morning after some router trouble but other than that it is the best jig I have ever used easy to assemble and maintain directions were spot on no trouble understanding them and the execution was flawless now I am waiting for the x-y vise so i can do my polymer 80..

S
02/05/2019
shane

Super easy

super easy to use it was my first time building an ar and it took no time at all very happy with my purchase!

A
02/06/2018
Anonymous

1st time builder, pretty easy to use the Easy 2 Jig

This is the first time I have tried to mill an 80% lower and after watching the video, reading the instructions and taking my time, I was able to successfully make a working lower. It took me about 2 1/2 hours to mill out-I was not in a rush and the finished product shows it. Take your time, use cutting fluid and follow the instructions and enjoy!

A
02/06/2018
Anonymous

1st time builder, pretty easy to use the Easy 2 Jig

This is the first time I have tried to mill an 80% lower and after watching the video, reading the instructions and taking my time, I was able to successfully make a working lower. It took me about 2 1/2 hours to mill out-I was not in a rush and the finished product shows it. Take your time, use cutting fluid and follow the instructions and enjoy!

NEVER MISS ANOTHER DEAL

Sign-up for exclusive discounts, new product releases and updates from 80-lower.com.

100% Satisfaction
Guaranteed

Customer Service is our passion and we are here to answer any questions you have.
888-623-6480

Shop With PRIDE

Shop With Confidence

Secure Payment

Left Menu IconMENU
Right Menu Icon