Showing all 8 results
G80 Grip Module Holster-ready and built for feel, the G80 Grip Module delivers proven GLOCK® G19 Gen3 ergonomics in a sleek, purpose-built housing. Your G80 Receiver drops straight in through the standard front and rear pins, no special tools needed, and the grip runs standard GLOCK® Compact magazines across 9mm, .40 S&W, and .357 SIG….
G80 Next Build Kit [Receiver + Grip] Already have a jig from your first build? This one’s for repeat builders — just the receiver and grip module, so you’re not paying for a jig you already own. Same steel FCU, same drop-in ready grip, same quality, at a price that makes your second build (or…
G80 Next Build Kit w/ Matador Arms Grip Module [Receiver + Matador Grip] Already have a jig from your first build? This one’s for repeat builders — just the receiver and the Matador Arms grip module, so you’re not paying for a jig you already own. Same steel FCU, same drop-in 120R fit, now with…
G80 Polymer Jig Build Kit [Receiver + Grip + Polymer Jig] Everything you need to go from raw steel to finished FCU, in one box. The G80 Build Kit pairs the unfinished receiver with the polymer clamshell jig and a grip module — all engineered to work together, so you’re not chasing down compatibility issues…
G80 Polymer Jig Build Kit w/ Matador Arms Grip Module [Receiver + Matador Grip + Polymer Jig] Everything you need to go from raw steel to finished FCU, in one box — now with the aggressive Matador Arms grip. The G80 Build Kit pairs the unfinished receiver with the polymer clamshell jig and a Matador…
G80 Unfinished Receiver with Pins and Slide Lock Spring This is where your build starts. The G80 Unfinished Receiver is a precision-machined steel fire control unit — locking block, trigger housing, and slide rails cut from one solid piece of heat-treated 4140 steel giving it extra strength and reliability over the 80% polymer frames of…
This step-by-step downloadable guide describes how to assmble a glock slide. We’re putting together a GLOCK 19 slide using one of our GLOCK build kits. These instructions are applicable for other slides, too, like the G17 or G43. How do you get your download? ***You can download your digital purchases by clicking the links on…
G80 Receiver Pins and Slide Lock Spring Lost a pin mid-build? Grab a spare set before it slows you down. This is the exact hardware that ships with every G80 Unfinished Receiver — self-retaining coiled spring pins that seat themselves in the frame on their own, no interference fit required. Compatibility The G80 uses its…
Grab a frame blank to start your 80% GLOCK build.
To assemble your GLOCK® kit, you need one of these 80% GLOCK® frames. These firearm blanks are compatible with newer GLOCK® components, including factory and aftermarket GLOCK parts.
These frames are non-functional, and unfinished. They’re considered firearm frame blanks, which means they cannot accept the components necessary to make them into working firearms. You, the builder, must finish fabricating the frame. Once fabrication is complete, your frame is considered a firearm under federal law, and it can accept parts like a barrel, slide, trigger, and the pins and springs needed to function.
Assemble your completed frame with a GLOCK kit.
Our available GLOCK build kits include all the parts needed to assemble your finished frame. Magazines are sold separately.
These frames are compatible with certain factory GLOCK® handgun models. Choose the frame option below, based on the model and caliber you wish to fabricate and assemble.
Some states have banned 80% frames and certain firearm parts, or have otherwise restricted the sale and ownership of products we sell. So, be sure to check your local and state laws. We can’t ship our products to certain states. Please check our Shipping & Return Policy before placing an order (see restrictions).
Coming from a Polymer80 build? Read P80 vs G80: How the Polymer80 Frame and G80 Compare to see what changed and which of your parts still fit.
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80% Lowers, a/k/a 80-lower.com nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At 80-Lower.com, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.
