The Elite Builder Patriot 80% Lower Jig - AR9/AR10/AR15 (With Tooling)

$399.99
$269.99
SKU:
EB-Patriot

Description

The Elite Builder became one of the most popular jigs when it comes to fabricating a 5.56 or 9mm 80% lower. Now, The Elite Builder Patriot Jig can complete virtually all the AR platforms' 80% lowers! We included new template plates so the jig can also cut and drill .308 lowers. Now it's a top choice for completing an 80% 6.5mm or AR-10 / LR-308, too. Pair it with the Patriot Pack and get all 3 lowers with your jig. With its hardened alloys and precision drill bushings, the Elite Builder will knock out your forged, billet, and polymer receivers with tolerances as close as 0.001".

HSS Bits for Multiple Builds

The jig’s only as good as the bits you use it with. So, the Elite Builder includes quality industrial-grade HSS (high-speed steel) drill bits and end mill bits to cut through all that aluminum in no time. All you need to complete your receiver blank is a basic drill press and about two hours’ time. The tool kit includes:

  • (1) ⅜ Drill Bit - 5”
  • (1) 5/32 Drill Bit - 3”
  • (1) ⅜ Short End Mill - 3”
  • (1) 5/16 Short End Mill - 4”
  • (1) ⅜ Long End Mill - 4”

Jig Features & Specs:

  • Self-aligning jig requires no special fitting during setup
  • Now compatible with AR-10/LR-308, AR-15 and AR-9
  • Black anodized finish protects against rust and corrosion
  • Pre-drilled holes for hammer, trigger, and safety pin holes
  • Reinforced steel template plates for completing multiple lowers

Find detailed jig assembly and machining instructions here.

Other manufacturer's billet 80% lowers may be compatible with the Elite Builder 80% lower jig, provided their lower receiver design adheres to mil-spec specifications.

*Important - This jig was designed with a drill press in mind for completing your 80% lower and is not designed to be used with a router/laminate trimmer.

No FFL required  Made in the USA  Lifetime Warranty

Shipping Restrictions

Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or “assault weapons” (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily

80-Lower.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.