AR9 Pistol Build Kit (10.5” Nitride Barrel & 9” M-Lok Handguard) w/ 80% Lower (1:10 Twist)

$815.43
$740.00
SKU:
9MM-105-9MLOK-PKL

Description

Get the most accuracy when it counts using this AR-9 Pistol Built Kit. This kit’s 10.5” CMV barrel affords a compact profile and optimal supersonic velocity. A lightweight M-Lok handguard offers plenty of room for your tac-lights and favorite accessories. 

This Pistol Kit uses a hybrid 9mm AR bolt carrier group, allowing it to accept any 9mm Glock magazines with no modification. Select the optional AR-9 80% lower with your kit to complete your pistol build in a single day.

AR-9 Pistol Build Kit Specs:

Barrel Length: 10.5″
Barrel Steel: 4150 CMV, heat-treated
Barrel Finish: Nitride
Muzzle Thread: 1/2×36
Chamber: 9mm Parabellum
Twist Rate: 1:10
Muzzle Device: A2 flash hider
Receiver Material: Forged 7075 T6
Receiver Type: Flat-top w/ Picatinny
Handguard Type: Lightweight 9” M-Lok
Bolt Carrier Group Included: Yes
Bolt Steel: Shot-peened, MPI-tested, 8620 steel
Bolt Carrier Profile: 9mm Hybrid
Charging Handle Included: Yes

AR-9 Pistol Build Kit Features:

  • Complete build kit w/ optional lower
  • Includes pre-built 9mm AR upper
  • Hybrid 9mm AR bolt carrier group
  • High-quality CMV barrel for accuracy
  • Compatible with Glock magazines
  • Features enhanced, polished trigger
  • Not considered a firearm, no FFL required
  • Proudly built in the U.S.A.
  • Backed by Lifetime Warranty

Barrel: Nitride-coated, 10.5”, chambered in 9mm Parabellum. Made of 4150 CMV steel. Heat-treated. Features 1:10 twist rate. Includes custom 9” lightweight M-Lok handguard, and A2 flash hider.

Upper: Mil-spec, made of forged 7075 T6 aluminum. Hard-coat anodized (Type III).

Bolt: Custom 9mm AR hybrid bolt carrier group. Compatible with 9mm Glock magazines. Heat-treated. Nitride finish. 8620 steel.

80% Lower: Complete with optional AR-9 80% lower. Mil-spec fittings. Type III Hardcoat anodized finish.

Lower Parts Kit: Mil-spec 9mm AR lower parts kit. Enhanced, polished trigger (EPT). Six-position buffer tube. SB Tactical Pistol Brace. Carbine buffer spring. 9mm pistol buffer.

Charging handle: Standard AR-15 charging handle.

Please note: If completing your AR-9 build using the optional 80% lower, please select an AR-15-compatible 80% jig from our available options.

No FFL required  Made in the USA  Lifetime Warranty

Shipping Restrictions

Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or “assault weapons” (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily

80-Lower.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, New Jersey, New York, Pennsylvania, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.