AR-10 80% RAW Billet Lower Fire/Safe Marked (1-pack) & Easy Jig Gen 2 Multi Platform w/ Tooling

$494.99
$389.99
SKU:
EP-EJG2MP_EP-EJG2TK_TGH-L308R2

Description

(1) Raw Fire/Safe Marked Billet .308 80% Lower Receiver:

  • Platform: .308
  • Color: Raw - no anodization
  • DPMS Gen 1
  • Quantity: 1
  • Fire/Safe Marked: Yes
  • Billet 6061-T6 Aluminum
  • Broached Magwell
  • Enhanced, heavy duty trigger guard
  • 100% Made in the USA
  • NO FFL REQUIRED

80% Lower Jig (Easy Jig Gen 2) with Tooling:

Meet the fastest 80% lower jig on the face of the Earth. Just when you thought jigs couldn’t get any better, 80% Arms comes out with the Easy Jig Gen 2 and totally blows your mind. There is nothing “minor” about the changes implemented in the Easy Jig Gen 2. Built for every 80 percent lower ever made, speed, re-use, universality, durability and user-friendliness, this 80% lower jig accomplishes that and so much more. The Easy Jig Gen 2 Multi-Platform Jig is the most revolutionary and most important jig created since the creation of the original Easy Jig (Easy Jig Gen 1). With over 3 years of learning, knowledge and overall refinement, the Easy Jig Gen 2 is finally available to the public. Friends, meet the Easy Jig Gen 2 Multi-Platform Jig - The most universal, least amount of labor, least amount of time, easiest 80% lower jig made. Ever.

Wildly Universal:

  • Compatible with ANY manufacturer’s AR-15, DPMS Gen 1 .308 (LR-308) and AR-9 80 percent lower
  • Converts from AR-15 to LR-308 jig in a few seconds

Insanely Easy:

  • Integrated measuring guides
  • No drill press required
  • Includes how-to manual, instructions, and link to video instructions

Freaky Fast:

  • Complete 80 percent lowers in less than 30 minutes
  • 90% less drilling than competing 80% lower jigs
  • No jig disassembly required to remove 80 lower
  • Insert and remove 80 percent lower in less than 10 seconds
  • Reduce clean-up time with Shop-Vac buffer tube attachment

Crazy Durable:

  • Drilling surfaces are constructed of hardened steel
  • Side plates constructed of solid steel
  • Router plate design eliminates end mill from touching jig

Drill bits included:

  • 1) 3/8 inch drill bit
  • 1) 5/32 inch drill bit
  • 1) 21/64 inch drill bit

End mill bit included:

  • 1) 5/16 inch end mill bit – solid carbide with ¼ inch shank (to fit into the compact router)

Note: It is recommended that you have 1 end mill bit for every 3 80% lowers you plan to complete. For instructions on how to use the Easy Jig gen 2, check out this video! No FFL is required to purchase this lower receiver. This forged 7075 aluminum 80% lower receiver is not considered a firearm and is compliant with the gun control act of 1968 not classified as a firearm as defined in 18 U.S.C. 921(a)(3).

No FFL required  Made in the USA  Lifetime Warranty

Shipping Restrictions

Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or “assault weapons” (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily

80-Lower.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.