Lifetime Warranty Lifetime Warranty Made in the USA Made in the USA FREE Shipping on $325+ Free Shipping on all orders $325+!
80% L❂WERS

80% Lowers Fire/Safe (3-pack) & Easy Jig Gen 2 Multi Platform with Tooling (AR-9 / AR-15 / LR-308)

$609.95 $479.95 (You Save $130.00)

80% Lowers Fire/Safe (3-pack) & Easy Jig Gen 2 Multi Platform with Tooling (AR-9 / AR-15 / LR-308)
80% Lowers Fire/Safe (3-pack) & Easy Jig Gen 2 Multi Platform with Tooling (AR-9 / AR-15 / LR-308)

Out of stock

Out of stock

Free Shipping on all orders $325+!



(3) Black Fire/Safe Marked 80% Lower Receivers:

  • Color: Anodized Black
  • 100% Mil-Spec
  • Quantity: 3
  • Fire/Safe Marked: Yes
  • Forged 7075-T6 Aluminum
  • Broached Magwell
  • 100% Made in the USA

80% Lower Jig (Easy Jig Gen 2) with Tooling:

Meet the fastest 80% lower jig on the face of the Earth. Just when you thought jigs couldn’t get any better, 80% Arms comes out with the Easy Jig Gen 2 and totally blows your mind. There is nothing “minor” about the changes implemented in the Easy Jig Gen 2. Built for every 80 percent lower ever made, speed, re-use, universality, durability and user-friendliness, this 80% lower jig accomplishes that and so much more.

The Easy Jig Gen 2 Multi-Platform Jig is the most revolutionary and most important jig created since the creation of the original Easy Jig (Easy Jig Gen 1). With over 3 years of learning, knowledge and overall refinement, the Easy Jig Gen 2 is finally available to the public.

Friends, meet the Easy Jig Gen 2 Multi-Platform Jig – The most universal, least amount of labor, least amount of time, easiest 80% lower jig made. Ever.

80% Lower Jig (Easy Jig Gen 2) with Tooling:

Wildly Universal:

  • Compatible with ANY manufacturer’s AR-15, DPMS Gen 1 .308 (LR-308) and AR-9 80 percent lower
  • Converts from AR-15 to LR-308 jig in a few seconds

Insanely Easy:

  • Integrated measuring guides
  • No drill press required
  • Includes how-to manual, instructions, and link to video instructions

Freaky Fast:

  • Complete 80 percent lowers in less than 30 minutes
  • 90% less drilling than competing 80% lower jigs
  • No jig disassembly required to remove 80 lower
  • Insert and remove 80 percent lower in less than 10 seconds
  • Reduce clean-up time with Shop-Vac buffer tube attachment

Crazy Durable:

  • Drilling surfaces are constructed of hardened steel
  • Side plates constructed of solid steel
  • Router plate design eliminates end mill from touching jig

Drill bits included:

  • 1) 3/8 inch drill bit
  • 1) 5/32 inch drill bit
  • 1) 21/64 inch drill bit

End mill bit included:

  • 1) 5/16 inch end mill bit – solid carbide with ¼ inch shank (to fit into a compact router)

Note: It is recommended that you have 1 end mill bit for every 3 80% lowers you plan to complete.

For instructions on how to use the Easy Jig gen 2, check out this video!


No FFL is required to purchase this lower receiver. This forged 7075 aluminum 80% lower receiver is not considered a firearm and is compliant with the gun control act of 1968 not classified as a firearm as defined in 18 U.S.C. 921(a)(3).

No FFL required Made in the USA Lifetime Warranty

80% Lowers Fire/Safe (3-pack) & Easy Jig Gen 2 Multi Platform with Tooling (AR-9 / AR-15 / LR-308)

$609.95 $479.95 (You Save $130.00)

Out of stock

Out of stock

Save For Later
Save For Later

Free Shipping on all orders $325+!

Customer Reviews

4.8 Based on 6 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

  • router
  • project
  • pilot hole
  • mistake
  • material
  • end mill
  • vibration
  • center

Gen 2 Jig

The jig is very well made. So easy to use. I did break the end mill though, but, was my mistake. The router was not set up properly which caused minor vibration. About half way thru the project I started the router in the pilot hole but was just a bit off center and it bit too much material, breaking the end mill. No damage to the lower but I had to order a new end mill. Project is now complete and working as it should. This was a very fun project and am looking forward to milling the other two lowers.


Outstanding piece of equipment

The Easy Jig Gen 2 was so easy to use. The online videos extremely helpful. I cut my first lower in about 2 hours. I was being extra cautious as not to mess up. My only tip is to make sure the router stops before you remove it from the jig. I put a small divot in on the bottom edge of my top plate. The top plate is okay but, it could have gone bad real easily.


full size router

I bought the easy gen 2 kit and and a full size router. However I didn't purchase the full size router plate. So I will be ordering that and once I receive it I will be milling out my lowers. So far it the Kit has been easy to put together. I am really looking forward to completing these lowers.

Timothy g.

Jig and 3 pack lowers

After hearing of an 8 week back order, i was surprised after 4 weeks when they not only sent an email but texted my phone that they were about to ship! Received them and was totally excited to start and finished 2 of 3 easily with a dewalt hand router and HF drill press (i know) but it handled it well. And for gaving no experience with this process, the video instruction was perfect, i ended up doing them all in my kitchen of my apartment, and ive got to say i was surprise how easy it was and my work turned out pretty damn sweet.. super excited to put them together and working on getting my friends to start their own!


very good company. " Gen. 2"

I, was disappointed at first the 21/2" screw was bent, Ryan the owner called me back and sent the screw right out. I, am very pleased, THANK YOU, RYAN


Sign-up for exclusive discounts, new product releases and updates from

100% Satisfaction

Customer Service is our passion and we are here to answer any questions you have.

Shop With PRIDE

Shop With Confidence

Secure Payment

Left Menu IconMENU
Right Menu Icon