80% Lowers Fire/Safe (1-pack) & Elite Builder 80% Lower Jig - AR15/AR9 (With Tooling)

$404.99
$279.99
(You save $145.00 )
SKU:
EB-15JIG_EB-TOOL-KIT_AR2180-BAL

Description

This Elite Builder 80% Lower Jig is compatible with our Forged 80% Lowers and our Premium Fire/Safe Marked Billet 80% Lowers! Other manufacturer's billet 80% lowers may be compatible with the Elite Builder 80% lower jig, provided their lower receiver design adheres to mil-spec specifications.

Start your from-scratch AR-15 build the right way, with one of the most popular 80% lower receivers on the market -- our original forged and engraved unit -- coupled with the new Elite Builder Jig, made for precision and professional results.

The Forged “FIRE/SAFE” 80% Lower

Our forged receiver blank ships with “FIRE/SAFE” markings engraved. The rear shelf and takedown pin hole are also fabricated, reducing total machining time and ensuring a precise fit with your upper receiver.

Receiver Specs:

  • Type III Hard Anodized 
  • 100% Mil-Spec Fittings
  • Fire/Safe Marked: Yes 
  • Forged 7075-T6 Aluminum 
  • Broached Magwell 
  • Made in the USA 
  • NO FFL REQUIRED

The Elite Builder Jig w/ HSS Tooling

Unlike many other aluminum jigs, the Elite Builder’s made from hardened steel with an anodized finish. Hardened drill bushings paired with a drill press ensure your hammer, safety, and trigger pin holes come out perfect, allowing your LPK to install easily and function flawlessly. High-speed steel bits provide better results than carbon bits, and the provided end mill is center-cut for easy plunge cuts with a drill press.

Jig Features:

  • Self-aligning jig requires no special fitting during setup 
  • Compatible with any standard AR-15 or AR-9 80% lower 
  • Black anodized finish protects against rust and corrosion 
  • Pre-drilled holes for hammer, trigger, and safety pin holes 
  • Reinforced steel template plates for completing multiple lowers

Included Tooling:

  • (1) ⅜ Drill Bit - 5” 
  • (1) 5/32 Drill Bit - 3” 
  • (1) ⅜ Short End Mill - 3” 
  • (1) 5/16 Short End Mill - 4” 
  • (1) ⅜ Long End Mill - 4”

Find detailed jig assembly and machining instructions here.

*Important - This jig was designed with a drill press in mind for completing your 80% lower and is not designed to be used with a router/laminate trimmer.

No FFL required  Made in the USA  Lifetime Warranty

Shipping Restrictions

Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or “assault weapons” (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily

80-Lower.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.