Lifetime Warranty Lifetime Warranty Made in the USA Made in the USA FREE Shipping on $300+

Free Shipping on all orders $325+!

Enhanced 80% Lower (1-pack) & 5D Tactical Router Jig PRO Multi Platform
$405.90 $324.95 (You save $80.95)
1
Larger / More Photos

Free Shipping on all orders $325+!

Description

SKU: 5D-PMJ_80-BAL

PLEASE NOTE: THE TOOLING FOR THE 5D TACTICAL ROUTER JIG PRO DEPENDS ON THE MODEL/BRAND OF YOUR ROUTER. PLEASE SEE THE "SIZING CHART" BELOW TO MAKE THE CORRECT TOOLING OPTION. 

The all-new Enhanced 80% Lower (1-pack) has been redesigned with the builder in mind. We took our standard black 80% lower and took it a little bit further by now tapping the bolt catch release and the rear takedown detent hole. These extra enhancements will speed up your lower parts kit install, no more messing around with difficult roll pins and springs during your install. 

(1) Black 80% Lower Receiver:

  • Color: Anodized Black
  • 100% Mil-Spec
  • Quantity: 1
  • Threaded Bolt Catch Hole
  • Threaded Rear Takedown Detent Hole
  • Screws and Hex Key
  • Forged 7075-T6 Aluminum
  • Machined Magwell
  • 100% Made in the USA
  • NO FFL REQUIRED

No FFL is required to purchase this lower receiver. This forged 7075 aluminum 80% lower receiver is not considered a firearm and is compliant with the gun control act of 1968 not classified as a firearm as defined in 18 U.S.C. 921(a)(3).

 

Router Jig PRO Multi-Platform (80% Lower Jig) by 5D Tactical (AR-15 / AR-10 / AR-9)

The Router Jig PRO by 5D Tactical is a multi-platform jig capable of completing AR 15, AR 10 (.308) and AR 9 80 percent lowers. The jig is guaranteed to universally fit all forged, billet and even polymer 80 percent lower receivers. The Router Jig PRO Multi-Platform is pioneering the 80% lower jig market by being the first jig to guarantee fitment of any and all AR 10 80 lowers.

The Router Jig PRO is constructed of extra thick, heat-treated solid steel plates. This construction method is designed to prevent the need to ever have to replace any plates – including the top and side plates. The side plates, alone, are 1.5” thick steel with built-in hardened steel drill bushings. The 5D Tactical Router Jig PRO Multi-Platform is the last 80% lower jig you will ever need for any of your gunsmithing projects!

How easy is it? Read the 5D Tactical Router Jig PRO Multi Platform (AR-15 / AR-10 / AR-9) Instruction Manual

 Lightning Fast:

  • Capable of finishing an 80% lower in less than 15 minutes
  • Only requires one pilot hole to be drilled prior to milling with your router
  • Patented ReadyMILL end mill bit is the strongest milling tool for finishing an 80% lower
  • Shop-Vac attachment cuts clean up time by 90% and creates smoother, safer milling surfaces
  • Most of the assembly requires only 14 Phillips head screws (included) requiring fewer tools and setup time

110% Universal:

  • GUARANTEED to fit ANY AR-15, AR-10, .308, AR-9 80% lower receiver 

Tougher Than Ever:

  • 1.5” side plates are twice as thick as any other 80% lower jig
  • 1.5” side plates contain built-in hardened steel bushing designed to never wear out
  • No-touch side plates guarantee fitment of any lower receiver
  • Heat-treated, extra-hardened steel plates constructed to last forever
  • High-speed bearing can be switched out with three screws

Dummy-Proof:

  • Integrated router plate guide pins fit within grooves on the jig top plate to ensure perfect milling of fire control group cavity
  • Router plate guides pins prevent from accidental slips causing damage to side plates of jig and side walls of 80% lower
  • Built-in drill bit depth guides to improve accuracy of milling depths

Perfect Fitment:

  • 80% lower is mounted to the jig using the front takedown pin and buffer tube to ensure perfect center for drilling and milling

You must purchase the correct ReadyMILL for your router. Your router's model number can be found on the label. 

PLEASE NOTE: THE TOOLING FOR THE 5D TACTICAL ROUTER JIG PRO DEPENDS ON THE MODEL/BRAND OF YOUR ROUTER. PLEASE SEE THE "SIZING CHART" BELOW TO MAKE THE CORRECT TOOLING OPTION. 

This is the complete toolkit needed for finishing an 80% lower receiver with the 5D Tactical Router Jig PRO. The patent-pending ReadyMILL comes packaged with all the drill bits necessary for finishing an 80% lower receiver at home. 

This 5D Router Jig PRO Toolkit includes (SOLD SEPARATELY):

  • (1) ReadyMILL (Choose size below based on your router model)
  • (1) 3/8" Black and Gold High-Speed Steel Drill Bit
  • (1) 21/64" Black and Gold High-Speed Drill Bit
  • (1) 5/32" Black and Gold High-Speed Drill Bit

READYMILL Sizing Guide:

Tooling Set A Tooling Set B Tooling Set C Tooling Set D (Requires Full-Size Router Plate)

Bosch PR10E

Bosch PR20EV
DeWalt DWE6000
Porter Cable 6430
Porter Cable 6435 

Ryobi P601      Rigid R24012

Craftsman28212
DeWalt DWP611
Porter Cable 450
Makita RT0701C

Bosch 1617EV
Bosch 1617EVS
Craftsman 2767
Craftsman 27683
Craftsman 50429
DeWalt DW616
DeWalt DW618

The patent-pending ReadyMILL is the first and only Router-Ready End Mill which threads directly to your router, eliminating the need for the collet and further stabilizes your end mill bit even more.

Please Note: If you will be drilling your trigger pilot hole on a 7075 lower receiver, we highly recommend the use of a drill press. Trying to drill this hole using a hand drill is very difficult given the hardness of 7075 aluminum. If you are using a 6061 lower receiver, you may be able to drill the trigger pilot hole using your hand drill and avoid the need for a drill press, but we still highly recommend the use of a drill press to ensure that your holes are perfectly straight.

Please note this Tool Kit is for the Router Jig PRO only. The tooling for the Original 5D Tactical Router Jig can be found here.

How easy is it? Read the 5D Tactical Router Jig PRO Multi-Platform (AR-15 / AR-10 / AR-9) Instruction Manual

No FFL Required Made In The USA Lifetime Warranty

Enhanced 80% Lower (1-pack) & 5D Tactical Router Jig PRO Multi Platform

1
$405.90 $324.95 (You save $80.95)
Secure Checkout

Free Shipping on all orders $325+!

Customer Reviews

Based on 1 reviews
5 Star
100% 
1
4 Star
0% 
0
3 Star
0% 
0
2 Star
0% 
0
1 Star
0% 
0
Write a Review Ask a Question
  • Reviews (1)
  • Questions (0)

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

JD
07/24/2018
Jon D
USA

Arrived on time, simple to get going

The thing got here right when I expected it, the process was a breeze with the downloadable instructions, and now I have an amazing looking lower. 'Nuff said.