6.5 Creedmoor Rifle Kit (20” Nitride Match Barrel & 18” M-Lok Handguard) w/ 80% Lower (1:8 Twist)

$1,012.38
$900.00
SKU:
65CM-20-18MLOK-RKL

Description

For the ultimate long-range bench rifle, look no further. This 6.5 Creedmoor-chambered Rifle Kit ships with one goal in mind: Confidently hitting targets at distances up to 700 meters or more. The included match-grade barrel is made from 4150 steel and heat-treated to obtain a hardness rating of RC 28-32. The result is a laser-precise barrel that promises long barrel life.

The included M-Lok handguard is fully custom, free-floated, and measures 18” for all of your accessories, bipods, and more. Underneath, a quality CMMG Lower Parts Kit is included with a crisp, single-stage trigger. Providing a consistent sight picture is a classic M4 buttstock with a shorty buffer tube and buffer system. Doing all the dirty work inside is a rugged M16, Full-Auto bolt carrier group.

6.5 Creedmoor Rifle Kit Specs:

Barrel Length: 20″
Barrel Profile: Light contour
Gas System: Mid-length
Barrel Steel: 4150, match-grade
Barrel Finish: Nitride
Muzzle Thread: 5/8-24
Chamber: 6.5 Creedmoor 
Twist Rate: 1:8
Diameter at Gas Block: 0.750”
Gas Block Type: Low-profile
Muzzle Device: A2 flash hider
Receiver Material: Forged 7075 T6
Receiver Type: Low-profile w/ Picatinny
Handguard Type: Custom, super-slim 18” M-Lok
Bolt Carrier Group Included: Yes
Bolt Steel: Shot-peened, MPI-tested, 9310
Bolt Carrier Profile: M16 Full-auto
Charging Handle Included: Yes

6.5 Creedmoor Rifle Kit Features:

  • Complete built kit (w/ optional 80% lower)
  • Features match-grade 4150 barrel
  • No FFL required to purchase
  • Ships straight to your front door
  • Upper is pre-built and ready to fire
  • Mil-spec fittings and finishes
  • Proudly built in the U.S.A.
  • Backed by a Lifetime Warranty

Barrel: Nitride-coated, match-grade, 20”, chambered in 6.5 Creedmoor. Made of 4150 steel. Features 1:8 twist rate and rifle-length gas system. Includes custom 18” super-slim M-Lok handguard, 0.750″ diameter low profile gas block, and .308 Shark Muzzle Brake.

Upper: Mil-spec, made of forged 7075 T6 aluminum. Hard-coat anodized (Type III).

Bolt: Mil-spec, M16 full-auto. Shot-peened, made of 9310 steel. Includes 8620 gas carrier.

80% Lower: Complete with an optional 80% lower. All lowers include mil-spec fittings and hard-coat anodizing.

Lower Parts Kit: Includes mil-spec CMMG lower parts kit. Features six-position M4 buttstock, shorty buffer tube, and buffer.

Charging handle: Standard 7075 Forged charging handle.

Please note: If completing your 6.5 Creedmoor build using the optional 80% lower, please select an 80 lower jig from our available options.

No FFL required  Made in the USA  Lifetime Warranty

Shipping Restrictions

Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or “assault weapons” (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily

80-Lower.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.