Polymer80 Jig Kit

Polymer80 Jig Kit

If you're ready to build a handgun or rifle from scratch (and you want to do it as affordably as possible), then a Polymer80 Jig Kit might be the choice for you: Each P80 jig kit includes either a GLOCK®-compatible polymer 80% frame or AR-15 80% lower plus the finishing jig and required bits and tooling for cutting and drilling either 80% unit.

How the P80 Kits Work

Once you receive your P80 jig kit, you'll perform some basic machining to fabricate the "not-a-firearm" frame or receiver blank into a functional unit, a firearm under legal definition. Then, you can install all the parts required to complete your build. If you bought a Polymer80 pistol kit, you'll pair it up with the corresponding GLOCK® Gen3 components. Complete Pistol Build Kits include all the parts you need to build a handgun in one order, including quality factory components. The frame-and-jig combo kits include a stainless steel locking block and rear rail module for your slide and trigger mechanism.

Not a Firearm Under Federal Law

Each kit's included 80% lower or 80% frame is not considered a firearm under federal law. And building a gun at home privately, for personal use, is legal to do under federal law -- no FFL, no paperwork, no background check required. Some states ban or restrict kits like these, including the practice of building a firearm at home (some states allow this, but require a background check) so check our Shipping Policy for restrictions, before ordering. We cannot ship our products to all states.

P80 & GLOCK Compatibility

  • The PF940C jig kit is compatible with G19, G23, and G32 handguns.
  • The PF940v2 jig kit is compatible with G17, G22, G24, G31, G34, and G35 handguns.
  • The PF940SC jig kit is compatible with G26, G27 handguns.

If you purchase a P80 AR-15 80% lower jig kit, your finished stripped lower will be 100% compatible with any conventional AR-15 parts! That includes any prebuilt upper, lower parts kit and any AR-15 trigger, buffer system, and other mil-spec components.

Completing Your P80 Frame or Receiver

Each Polymer80 jig includes the necessary detailed instructions for confidently cutting and drilling your 80% receiver or frame. Working with polymer is even easier than machining aluminum or steel, so basic hand tools are all you need.

Here's how to cut and drill your 80% GLOCK®-compatible frame. 

Advantages of a Polymer80 Jig Kit

  • No FFL required! 
  • Includes 80% lower, jig, and tooling bits
  • Requires basic hand tools and no experience
  • Most affordable way to build an AR or GLOCK®-compatible pistol
  • Built-in safeguards and easy-to-follow instructions
  • All kits proudly made in the USA 

Your custom build awaits.

 


DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

 

DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At 80-lower.com, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.

Compare Selected

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, New Jersey, New York, Pennsylvania, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.