Lifetime Warranty Lifetime Warranty Made in the USA Made in the USA FREE Shipping on $300+

Free Shipping on all orders $325+!

Introducing the 5D Router Jig Pro and Easy Jig Gen 2 Multiplatform FREEDOM COMBOS!

Picking up an 80 percent lower and 80 lower jig has quickly become the quickest and easiest way to ensure your 2nd Amendment rights are guaranteed. Offering up the ability to quickly (and 100% legally) build an AR-15 from scratch, this dynamic duo of gun stuff is your key to a good day at the range with a black rifle you built yourself, from scratch. But with all these kits and calibers available, should you go for a standard AR-15 in 5.56, an AR-10 in .308, or go new with a 9mm-chambered AR-9? How about all three?

Introducing our Multiplatform FREEDOM COMBOS!

We’re very excited to provide a 3-in-1 kit that includes one of the two most popular 80% lower jigs, all the tooling you need to get the job done, and 3 – yes, three! – 80% lowers. In each COMBO you’ll get one AR-15 80% lower chambered in .223 and 5.56 with Fire/Safe markings, an AR-10 80% Lower ready for .308, and one of our updated billet AR-9 80% Lowers!

First, choose your 80% Jig: The 5D Router Jig Pro or the Easy Jig Gen 2?

The 5D Tactical Router Jig Pro and the Easy Jig Gen 2 hold titles as two of the most popular, all-inclusive, easy-to-use 80% lower jigs available on the market. It’s only fitting we paired them up as the options you get to choose in our FREEDOM Combos. Which one should you pick?

Easy Jig Gen 2: More Affordable, All-Inclusive

The Easy Jig Gen 2 is the crowd favorite because of its value, ease of use, and its many written and video tutorials. Most first-timers pick the Easy Jig Gen 2 for this reason, and we can’t argue. At just under $300, you’ll get everything you need to whip up three AR lowers in a single day:


Easy Jig Gen 2 Freedom Combo


Features:

  •         Machine any lower in under 30 minutes
  •         Universally compatible with any AR-15, Gen 1 DPMS .308, and AR-9 lower
  •         Requires 90% less drilling than competing jigs
  •         Insert and remove a lower in less than 10 seconds!
  •         Hardened steel construction with no-touch guides and plates
  •         Includes 3/8, 5/32, 21/64 drill bits
  •         Includes hardened 5/16 end mill bit

The Easy Jig Gen 2 is specifically designed to machine up to three separate lowers with original tooling, no replacements required. It’s perfect for your new FREEDOM COMBO and it’ll allow you to master all three lowers in a single day!


5D Tactical Router Jig Pro: Premium, Tough, Fast

The 5D Tactical Router Jig Pro is considered the top tier of 80% lower jigs. Considered the fastest jig available, the 5D Tactical Router Jig Pro can help you spit out a finished 80% lower in under 15 minutes – and it’ll keep going and going thanks to its reinforced construction:

5D Router Jig Pro Freedom Combo


  •         Requires just one pilot hole to be drilled for completion
  •         Patented ReadyMILL end mill bit is strongest milling tool available
  •         Guaranteed to fit any AR-15, AR-10, .308, or AR-9 lower
  •         1.5” thick, heat-treated side plates
  •         Built-in hardened steel bushings never wear out
  •         Reinforced guide plate pins prevent accidental slips and machining mishaps
  •         Built-in drill bit depth guide to ensure accuracy of milling depths

Although the 5D Tactical Router Jig Pro requires specific tooling sets depending on your router, it is universally capable of machining all three of your lowers in your FREEDOM COMBO in just one go! Although slightly more expensive than the Easy Jig Gen 2, the 5D Tactical Router Jig Pro is the 80% jig to pick if you plan on building many more lowers without slowing down.


Why our 80% lowers?

Sure, we made a great deal with our FREEDOM COMBOS, but we know you could buy your 80 lowers from elsewhere – so why ours? For starters, all the lowers we sell (including the three in your FREEDOM COMBO) are exclusively made from mil-spec, billet 6061 T6 or forged 7075 T6 aluminum. All lowers feature a mil-spec Type III hard anodized finish, all come pre-threaded for your buffer and tube, all come marked with FIRE/SAFE indicators, all are machined externally – all you need to do is machine the fire control group inside!


The FREEDOM COMBO ships to your front door!

Although the FREEDOM COMBO ships with everything you need to legally build a by-definition firearm, it does NOT require an FFL transfer, nor any red tape to own to use! If you can legally own a gun in your state, you can legally use the FREEDOM COMBO to build your three ARs without ever leaving your house.


Nothing in the FREEDOM COMBO is considered a firearm by the ATF’s definition until you finish machining one of those three 80% lowers! Obviously, we recommend you check your state and local laws before you begin machining, but you can place your order today and we’ll ship right away!


SHOP 5D Tactical Router Jig Pro FREEDOM COMBO


SHOP EASY JIG GEN 2 FREEDOM COMBO

DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At 80 Lowers, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.

Older Post Newer Post


0 comments


Leave a comment

Please note, comments must be approved before they are published