The Easy Jig GEN 2 Tutorial video is now available! This video features a step-by-step breakdown of the entire milling process for completing an AR-15 80 percent lower receiver using the revolutionary, multi-platform, universal Easy Jig GEN 2.
EASY JIG GEN 2 TUTORIAL VIDEO - FEATURES & DETAILS
The builder in the tutorial, Matt, is our in-house Product Expert at 80-Lower.com. During the video, he offers advice for both inexperienced and experienced builders at every step of the process. Within the video’s description, you can find important resources such as; the digital version of manufacturer’s Easy Jig GEN 2 Instructions, additional product details and an interactive Table of Contents. The Table of Contents is laid out so that you can jump to any specific step in the video quickly and effortlessly. Looking to see how to install the Buffer Screw Support? Head down to the video description and select the corresponding timeframe next to: STEP 5: INSTALLING THE BUFFER SCREW SUPPORT – 07:18.
Throughout the tutorial, you will see tips, suggestions, and warnings pop-up on the screen to help you finish your 80 percent lower successfully while avoiding common user errors. Certain on-screen messages will indicate a specific type of message. For example, the icon of a “yellow traffic light” means that you should take this next step more slowly and read the directions meticulously. Alternatively, the icon of a “green traffic light” means that you’re good to begin the next step.
WIN AN EASY JIG GEN 2 - ENTER NOW
From today until September 30th, 2017, we are giving away a complete Easy Jig GEN 2 with Tooling and 80 percent Lower every week! To enter yourself in the Easy Jig GEN 2 Giveaway, just submit your email address in the section below.
WATCH "EASY JIG GEN 2 TUTORIAL" VIDEO
EASY JIG GEN 2 TUTORIAL - SUMMARY
Overall, we had a lot of fun working with the Easy Jig GEN 2. With this version of the Easy Jig, it’s evident to us that the manufacturer, 80% Arms, was setting out to create not just another jig, but something revolutionary. Whether it’s the true, 100% universality with all AR-15, AR-9 and AR-10 DPMS 80 percent lowers or something that seems as simple as the Shop Vac Attachment System – the Easy Jig GEN 2 stands out in a growing crowd.
The built-in features and process was a great improvement over any of the 80% lower jigs on the market today – including the Easy Jig GEN 1. To better understand how the Easy Jig GEN 2 stands up the original, Easy Jig GEN1, head over to the “Easy Jig GEN 1 vs Easy Jig GEN 2 Comparison” article.DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At 80 Lowers, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.